鐵藝大門使用了一段時間后，也要注意使用和保養，才能使用地更久。那么濟南鐵藝大門使用時間久了要確保做好什么事情呢？

After the iron gate has been used for a period of time, attention should also be paid to the use and maintenance, so that it can be used for a longer time. So what should be done to ensure that Jinan Iron Gate has been used for a long time?

1.時間久了對鐵藝大門噴漆防腐蝕

1. After a long time, paint the iron gate to prevent corrosion

如果鐵藝大門使用時間久了表面會變舊，影響美觀。因此，需要對鐵藝大門進行噴涂以防止腐蝕。鐵藝大門噴涂技巧：將底座顏色噴在門上，如噴涂啞光黑，待其干燥后，刷上一層金漆，干燥后再噴上透明粉，這樣也可以達到一定的美學效果。

If the iron gate is used for a long time, the surface will become old, affecting the appearance. Therefore, it is necessary to spray the iron gate to prevent corrosion. Spraying skills for iron gate: spray the base color on the door, such as matte black, after it is dry, brush a layer of gold paint, and then spray transparent powder, which can also achieve a certain aesthetic effect.

2.確保門鎖的靈活性

2. Ensure the flexibility of the door lock

如果門鎖使用久了。打開和關閉就不靈活了。在這種情況下，您可以在活動鎖的兩側放一些油，或者您可以用肥皂擦拭它。這樣，門鎖就會變得更加靈活。

If the door lock has been used for a long time. Opening and closing are inflexible. In this case, you can put some oil on both sides of the movable lock, or you can wipe it with soap. In this way, the door lock will become more flexible.

3.使用自制彈性門擋，確保鐵藝大門不會損壞

3. Use self-made elastic door stop to ensure that the iron gate will not be damaged

鐵藝大門被強力打開時，有時碰到墻壁。很長一段時間后，門上的鎖盒和把手都會受到磕碰，這將影響鐵藝大門的美感。這時，你可以找到一個橡膠塊或只有小木塊釘在鉸鏈的下角，這樣鐵藝大門就不會受到磕碰損壞的影響。

When the iron gate is forcibly opened, it sometimes touches the wall. After a long time, the lock box and handle on the door will be knocked, which will affect the aesthetic feeling of the iron gate. At this time, you can find a rubber block or only a small wooden block nailed to the lower corner of the hinge, so that the iron gate will not be damaged by bumps.

4.確保鐵藝大門安全

4. Ensure the safety of the iron gate

鐵藝大門關閉不嚴時，很容易被風吹開，影響安全，此時，可以找一個適當大小的強力磁鐵，然后將它平放在鐵藝大門上方大約四分之一的高度，這樣在關門后，可以確保它被吸住。更不會輕易被吹開。

When the iron gate is not tightly closed, it is easy to be blown open by the wind, which affects the safety. At this time, you can find a strong magnet of appropriate size, and then place it horizontally at about a quarter of the height above the iron gate, so that it can be absorbed after closing the door. It will not be blown away easily.

鐵藝大門使用時間久了要確保做好什么？以上四點就是為您講解的內容了，您對此有什么問題就來我們網站http://www.1myl.com咨詢吧！

What should be done to ensure that the iron gate has been used for a long time? The above four points are the contents for you. If you have any questions about them, please come to our website http://www.1myl.com Consult!