如今很多自建房或是別墅都會安裝一扇鐵藝大門，但鐵門用久了就會出現各種問題。那么門口的濟南鐵藝大門下垂了怎么解決？和小編一起來看看吧。

Nowadays, many self built houses or villas will be equipped with an iron gate, but the iron gate will have various problems after being used for a long time. How to solve the problem that the iron gate of Jinan at the gate is drooping? Let's have a look with Xiao Bian.

先打開門露出內部的鉸鏈，之后使用螺絲刀擰緊螺釘。如果是情況比較嚴重的，須要更換新的螺釘。先使用鉆頭把孔鉆至所需的長度，之后再拆除原有的螺釘，并且從新安裝上新的螺釘進行固定。把牙簽或是碎片放入孔中，只用膠水進行填滿螺孔，把螺絲推在原來的地方，同時清潔表面多余的木膠然后進行測試即可。

First open the door to expose the inner hinge, then use a screwdriver to tighten the screws. If the situation is serious, replace the screws with new ones. Use a drill to drill the hole to the required length, then remove the original screws, and install new screws for fixation. Put toothpicks or fragments into the hole, fill the screw hole with glue only, push the screw in the original place, clean the excess wood glue on the surface and then test.

當我們在定制或是挑選鐵藝大門時，須要注意它的運輸，還要注意鐵制品表面噴漆或是涂層的原有可見性，否則鐵制品的表面很容易出現生銹，這樣才能減少鐵門的使用壽命和美觀性。

When we customize or select the iron gate, we must pay attention to its transportation, and also pay attention to the original visibility of the painting or coating on the iron product surface, otherwise the iron product surface is easy to rust, so as to reduce the service life and aesthetics of the iron gate.

在安裝鐵藝大門時，要選擇比較合理的地方進行安裝。比方說不能選擇周邊有許多硬物的地方，還要確保墻面的平整度，這樣安裝后的鐵藝門就會非常的穩固而牢固，還不會出現輕微的晃動，這樣就能確保門不會出現晃動和變形等。

When installing the iron gate, a reasonable place shall be selected for installation. For example, you can't choose a place with many hard objects around, but also ensure the flatness of the wall, so that the iron doors after installation will be very stable and firm, without slight shaking, so that you can ensure that the doors will not shake and deform.

在我們的日常衛生與門的清潔中，要選擇使用一些比較柔軟的棉針織物作為抹布使用或是比較柔軟的羊毛刷清潔。

In our daily hygiene and door cleaning, we should choose to use some soft cotton knits as rags or soft wool brushes for cleaning.

鐵藝門在潮濕的環境中非常容易出現生銹，因此我們盡量要把門安裝到通風的地方，這樣才能防止門的表保護膜因金屬過度腐蝕導致出現脫落。

Iron doors are very easy to rust in a humid environment, so we should try to install the door in a ventilated place to prevent the surface protective film of the door from falling off due to excessive metal corrosion.

以上是門口鐵藝大門下垂了怎么解決的相關知識就介紹到這里了，有需要了解更多資訊的朋友，請繼續關注我們網站http://www.1myl.com，為您推薦相關信息！

The above is the relevant knowledge about how to solve the problem of the hanging iron gate. If you need more information, please continue to follow our website http://www.1myl.com , recommend relevant information for you!